If you are weighing up a fabric lightbox vs snap frame lightbox, the fabric lightbox is the better buy for anything bigger than a poster. It goes up to 3m wide, has no glossy cover in front of the print, and a new graphic is just a printed fabric that presses into the frame. A snap frame lightbox makes more sense for an A-size poster that you change every few weeks, such as a menu, a price list or an offer, where a cheap paper print is the whole update cost.
The snap frame side of this guide describes lit snap frames in general and uses our unlit snap frames for the sizes. Our prices are ex VAT and were checked on 14 November 2026.

Fabric lightbox vs snap frame lightbox at a glance
The short answer is that a fabric lightbox gives you a bigger, evenly lit graphic with nothing in front of it, and a snap frame gives you the cheapest way to swap a small poster. The table sets the two graphic systems side by side.
| Fabric lightbox | Snap frame lightbox | |
|---|---|---|
| How the graphic fits | Fabric with a silicone edge pushed into a channel | Poster laid under a clear cover, edges snap shut |
| Graphic material | Printed backlit polyester fabric | Backlit poster film or paper |
| Cover in front | No cover | Clear cover over the poster |
| Sizes we sell | 1m x 1m up to 3m x 2m wall mounted | Unlit snap frames A4 to A1 |
| Price from | £553.95 ex VAT wall mounted | Lit version not sold by us |
| Best for | Large wall graphics and exhibition stands | A-size posters changed often |
Under the table sit two different ways of building a light box. One stretches a printed fabric across a deep frame with the lights inside it, and the other clamps a thin poster behind a clear sheet in a slim poster frame. That difference decides the size, the look, the cost of each new graphic and how easy each one is to move.
What a tension fabric lightbox is
A fabric lightbox is an aluminium frame with LED lighting built in and a printed fabric graphic stretched across the front. The fabric has a thin silicone strip sewn round its edge, which is why you will also see it called a SEG lightbox (silicone edge graphic), a tension fabric lightbox or a fabric light box. The strip presses into a channel in the frame and pulls the fabric tight, so the face looks frameless from a few steps away and the brand graphic runs edge-to-edge.
On our Illuminova 1m x 1m wall mounted SEG lightbox the frame is a 75mm aluminium profile with edge-lit LED strips fitted at the factory and the drivers hidden inside it. The LEDs light the fabric from its edges, so the design glows from corner to corner with no light bulbs or fluorescent tubes to change. The LED lightbox frame is a low profile, single-sided box, so it fits flat to a shop or reception wall. If you build a run of these lightboxes side by side, the lighting links from one frame to the next and the whole run needs only one power point.
The fabric graphic itself is the part you replace. To change it you pull the old fabric out of the channel and insert the new one, and the frame never comes off the wall. Because the graphic is fabric, it folds for posting and storing, which a rigid poster or acrylic panel cannot do.
How do snap frame light boxes work?
A snap frame light box works like a normal poster frame with a light panel behind it. The four edges of the frame flip open, you lay a poster on the panel, put the clear cover back on top and snap the edges shut. In a lit version the poster is usually printed on backlit film, and the lightbox panels behind the graphic illuminate it from the back. A non-lit poster on plain paper looks dull in one, so the film behind the cover matters as much as the light.
Our own snap frames are the unlit kind. The Trappa A1 snap frame is 625mm x 872mm and only 13mm deep, with a 25mm silver aluminium profile, mitred corners and a clear PVC sheet that protects the print. It takes posters up to 420 microns thick and hangs portrait or landscape, at £51.95 ex VAT. The same snap action is what a lit snap frame uses, with the LED panel adding depth behind the poster.

The appeal of snap frames is the running cost. A new poster is a single sheet, so if your offer changes every month, or you rotate a menu by season, each update costs very little. The downside is the size. Snap frames are made for A-size posters, and the clear cover in front can pick up reflections from hall lights and windows.
How edge-lit light boxes and snap frames hold the graphic
The real difference between the two frame light boxes is where the graphic sits and what is in front of it. A fabric lightbox holds the fabric by its silicone edge across the front of a deep box, with nothing over it. A snap frame holds a poster flat under a clear cover, clamped by the edges of a thin frame.

That has three practical effects. First, the fabric face has no cover to glare, so the lightbox graphics read clearly under bright exhibition lighting. Second, the 75mm depth of the fabric lightbox gives the light room to spread, which is what gives an even light distribution and an even illumination across a large face. Third, the snap frame is far slimmer, so it suits a corridor, a door or a menu point where a deep box would stick out.
One tip for edge-lit boxes. Busy, colourful designs light up best, while large areas of one flat colour can show slight differences in brightness, so it is worth building some variety into the artwork if you can.
SEG lightbox vs snap frame on an exhibition stand
For an exhibition stand, a SEG lightbox is the one to buy, because it comes in sizes that work as a stand wall or a stand-alone display, and it packs down for travel. A snap frame is too small to carry a stand on its own, so at a show it is a sign or menu holder rather than the main display.
If you need a lightbox you can carry to trade shows and marketing events, the freestanding Illumigo One 850mm x 2m portable LED lightbox is £276.95 ex VAT. It stands 2010mm tall on twin twist-out feet, weighs 5.6kg, uses a roll-up LED panel and goes up in under ten minutes without tools. It packs into a padded case, the fabric graphic folds in with it, and the power supply is a mains cable that enters under the frame.

For the stand itself, a wall mounted fabric lightbox needs a wall to fix to, so most exhibitors use the freestanding kind at shows and the wall mounted kind in a shop, office or showroom. My guide to a freestanding vs wall mounted lightbox goes through that choice in more detail, and the guide to a single vs double sided lightbox covers when a double-sided graphic is worth it.
Size and price of each LED light box
A fabric lightbox costs more to buy but covers far more wall. Our Illuminova wall mounted range starts at £553.95 ex VAT for 1m x 1m and goes up to the Illuminova 3m x 2m wall mounted SEG lightbox at £1,246.95, while our unlit A1 snap frame is £51.95. The drawing shows how much bigger the fabric lightboxes are.

| Lightbox | Size | Price from |
|---|---|---|
| Trappa A1 snap frame, unlit | 625 x 872mm | £51.95 ex VAT |
| Illumigo One portable LED lightbox | 850 x 2010mm | £276.95 ex VAT |
| Illuminova 1m x 1m wall mounted | 1000 x 1000mm | £553.95 ex VAT |
| Wall Mounted LED Lightbox 1m x 2m | 1000 x 2000mm | £719.95 ex VAT |
| Illuminova 1.5m x 1.5m wall mounted | 1500 x 1500mm | £728.95 ex VAT |
| Illuminova 3m x 2m wall mounted | 3000 x 2000mm | £1,246.95 ex VAT |
Every order includes FREE artwork design or proofing, so you can send your own file for us to check or have our team design it. The artwork guidelines cover file setup. We can also make custom sizes to fit a particular wall, and there is FREE UK delivery on orders of £200 or more.
SEG frame vs snap frame without lighting
If you do not need the light, the same choice still applies. An unlit SEG frame gives you a large, tight fabric graphic on a slim profile, and an unlit snap frame gives you the cheapest way to change a small poster. Neither needs power, so there is no cable to run to the wall.
Our 1m x 2m wall mounted SEG fabric frame is £237.95 ex VAT with a 20mm deep frame and one printed fabric graphic, against 13mm deep for the Trappa A1 snap frame. For a menu or notice that has to stand on the floor, the Sentry A3 snap frame poster and menu stand is £87.95 ex VAT, on a weighted base 1075mm tall.

Single-sided or double-sided backlit light boxes
Most wall mounted lightboxes are single-sided, because the back faces the wall, while a freestanding lightbox in an aisle or a shop window is often worth having double-sided. Snap frame lightboxes are almost always single-sided. Our 850mm x 2.4m freestanding LED lightbox display, double-sided is £590.95 ex VAT, with a lit graphic on both faces for window displays and open floor space in retail environments.
Fabric lightbox vs acrylic lightbox
A fabric lightbox vs acrylic lightbox comes down to the same graphic-type decision as the snap frame. An acrylic lightbox, sometimes called a crystal light box, has a clear acrylic face with the poster behind it, so it looks polished but carries the same glare and the same small sizes as a snap frame lightbox. Fabric has no face to reflect, folds for delivery and goes much bigger.
If you want a large, evenly lit graphic for a stand wall, a retail wall or a reception, fabric is the better material. If the display is small, close to people and needs a hard, glossy finish, acrylic is the one to look at.
Which lightbox to buy for your signage
Buy a fabric lightbox if the graphic is bigger than A1, will be seen at a distance or will travel to shows, and buy a snap frame if it is a small poster you change often. These rules cover most cases.
- Best for: exhibition stands and trade shows. Choose a freestanding fabric lightbox such as the Illumigo One, which packs into a case and goes up without tools.
- Best for: a lit wall graphic in a shop, office or reception. Choose an Illuminova wall mounted SEG lightbox, from 1m x 1m up to 3m x 2m.
- Best for: A-size signage, menus and offers you change often. Choose a snap frame, where each update is a single sheet.
- Best for: a big printed graphic with no power. Choose a wall mounted SEG fabric frame, which is 20mm deep and has no cable.
You can compare every fabric lightbox we sell in one place, from portable models to large wall mounted ones.
How we compared
This is a desk comparison of published information, not a test of the products. I compared the specs on our live listings for the Illuminova and Wall Mounted LED lightboxes, the Illumigo One portable lightbox, the wall mounted SEG fabric frame and the Trappa and Sentry snap frames, covering size, depth, lighting, how the graphic fits and price, all checked on 14 November 2026. For lit snap frame and acrylic lightboxes I described the format only.
Frequently asked questions
What is the difference between a fabric lightbox and a snap frame lightbox?
A fabric lightbox stretches a printed fabric with a silicone edge across the front of a deep LED frame, with no cover over it. A snap frame lightbox holds a poster under a clear cover in a slim frame whose edges flip open. Fabric goes much bigger and has no glare, and snap frames make small posters cheap to change.
Can I replace the graphic without replacing the light box?
Yes, with both types. On a fabric lightbox you pull the old fabric out of the channel and press a new one in, and the frame stays on the wall. On a snap frame you flip the edges open, swap the poster and snap them shut. In both cases you only pay for the new print.
Are LED light boxes suitable for exhibitions?
Yes. A freestanding fabric LED light box lights a graphic evenly on a stand, and the portable ones pack into a case. Our Illumigo One is 850mm x 2010mm, weighs 5.6kg and goes up in under ten minutes without tools.
Which type of lightbox is more affordable?
A snap frame is cheaper to buy and to update, because each new graphic is a single poster. Our unlit A1 snap frame is £51.95 ex VAT. Our fabric lightboxes start at £258.95 ex VAT for the Boss Light 850mm x 2m LED light box, a freestanding single-sided model.




