The difference between an edge lit and a backlit lightbox is where the LEDs sit. In an edge lit frame, LED strips run inside the frame edges and shine sideways across the back of the fabric. In a backlit light box, also called direct lit, the backlight is an LED panel or light blanket behind the print that shines straight through it. If you are weighing up an edge lit vs backlit lightbox for an exhibition stand, both give a bright, even display, so the choice comes down to your artwork, where it will stand and how you want to build it.
Prices below are live Stand Central prices, ex VAT, checked on 14 November 2026.

Edge-lit vs backlit light boxes at a glance
Edge lit light boxes light the print from the frame edges, and backlit light boxes light it from a panel behind the fabric. The table puts the two lighting types side by side, using the published specs of the frames we supply.
| Point | Edge lit | Backlit |
|---|---|---|
| Where the LEDs sit | The LEDs sit in strips inside the frame edges | Backlit LEDs sit on a panel or light blanket behind the print |
| How the light reaches the print | Edge lighting shines across the back of the fabric | The backlight shines straight through the fabric |
| Artwork that suits it | Edge lighting suits busy, colourful designs and photos | Backlighting suits large areas of one flat colour |
| Frame profile | Edge lit frames in this guide are 75mm to 125mm | Backlit frames in this guide are 50mm to 60mm |
| Lowest price in this guide | From £400.95 ex VAT (Fastframe LED 1m x 2m) | From £276.95 ex VAT (Illumigo One 850mm x 2m) |
| Best for | Best for wall mounted, hanging and double-sided frames | Best for a lit backwall or totem in a strong brand colour |
One thing that confuses people is that the print is called backlit fabric on both types. That just means a polyester made for light diffusion, so it spreads the light evenly across the face of the graphic. The lighting method is the part that differs.
How an edge-lit LED light box works
An edge-lit LED light box has LED strips fitted inside the aluminium or PVC profile around the frame, and they shine across the back of the fabric so the whole design glows. A black blockout liner or back panel closes the back of the frame, which pushes the light forward through your print instead of letting it escape behind.
Most of our range uses this method. The Illuminova wall mounted SEG lightbox has edge-lit LED strips pre-fitted in a 75mm profile with the drivers hidden in the frame, and the 1m x 1m size costs £553.95 ex VAT. The Fastframe LED lightbox frame puts 26 one-watt LED beads in its side profiles for a 6500K cool white light, and the 1m x 2m frame costs £400.95 ex VAT. The LEDs come fitted as strips or beads, not as separate LED bulbs, so there is nothing to wire up.
Our product pages are open about the one trade-off with edge lighting. It suits busy, colourful designs best, and large areas of one flat colour can show slight differences in brightness. The Premium freestanding frames use more LEDs along the long edges for a more even light, so that is the one to look at if your artwork has a lot of plain background.

How a backlit light box works with LED backlighting
A backlit light box puts the backlight behind the graphic, with LEDs evenly distributed across a light panel the size of the print, so the light travels straight forward through the fabric. LED spacing on that panel is what keeps it even. Because every part of the design has a light source directly behind it, the illumination stays even across a large plain colour.
The 3m Formulate LED backwall is the clearest example of LED backlighting in our range. Three light blankets sit inside the frame, carrying 36 LED strips and 360 LEDs at 6500K, for a light output of about 21,600 lumens across a 3m by 2.25m wall. The print is a stretch fabric sock that pulls over the frame and zips closed at the base. It costs £1,237.95 ex VAT single or double-sided, and the frame also builds 2m or 1m wide.

The Illumigo One portable LED lightbox is the smaller backlit option. Its backlight is a roll-up LED panel with the LEDs already fitted, behind an SEG fabric print in a 60mm white aluminium frame. It is 850mm wide and 2m high, weighs 5.6kg and costs £276.95 ex VAT, the lowest price of any frame in this guide.
Brightness and uniformity of edge-lit vs backlit lighting
Both lighting types are designed to illuminate the print evenly, so for most stand designs you will not see a difference from the aisle. Where backlighting has the edge is uniformity on big areas of one flat colour, because the light comes from the whole area behind the fabric rather than from one edge or two.
The difference between edge-lit and back-lit LED lighting rarely shows on a busy design, so the rule I would use is simple. If your design is a photo, a product shot or a busy pattern, edge lighting gives you a bright result and the widest choice of frames. If your design is mostly one solid brand colour with a logo in the middle, choose a backlight such as the Formulate, or a Premium frame, and build a little variety into the artwork if you can. FREE artwork design or proofing comes with every order, and our team can check a layout against the frame you choose before it goes to print. The artwork guidelines explain the file set-up.
- Busy, colourful artwork. Either type works, and edge lighting gives you the widest choice.
- Large flat brand colour. A backlight, or a Premium frame with more LEDs.
- Dim corner of the hall. Check the light output on the product page. The Formulate gives about 21,600 lumens across 3m.
Frame depth, mounting and signage
Of the frames in this guide, the backlit designs actually have the slimmest profiles, so the lighting method does not decide how deep the display is. The Formulate frame is a 50mm profile and the Illumigo One a 60mm profile, while the edge lit frames run from 75mm on the wall mounted lightboxes to 125mm on the Illuminova hanging lightbox.

Depth matters most for wall and ceiling signage, and for those jobs the edge lit frames are the ones made for it. The Illuminova wall mounted SEG lightbox sits just 75mm deep, fixes to the wall through holes every 500mm, and lets you change the print while the frame stays up, which suits shop and reception signage. The Illuminova hanging frame is 125mm deep, and the hanging pitons are included. A run of Illuminova wall mounted frames can link its lighting from one to the next, so the whole run needs only one power point.
Weight follows size more than the type of lighting. The backlit Illumigo One weighs 5.6kg, the Fastframe LED 1m x 2m 8.5kg, the backlit 3m Formulate 16kg and the 3m x 2m Illuminova freestanding wall 27.9kg.
Changing the print and putting it up
With both types you change the look by swapping the printed fabric, while the LEDs stay in the frame. On the edge lit frames and the Illumigo One, a silicone strip sewn round the edge of the fabric pushes into a channel in the frame and pulls it tight. On the Formulate, the print is a fabric sock that slips over the frame and zips closed.

Build time depends on the frame, not the lighting. The Fastframe LED frame arrives already built, so you unfold it, lock it with its support rod, twist out the feet and plug in. The Illumigo One is tool-free and goes up in under ten minutes. The Formulate pushes together in numbered sections that lock with push buttons, and the larger Illuminova walls join with an Allen key with the LED strips already fitted.
Which edge-lit or backlit frame to choose for your stand
Pick the frame for the job first, then check its lighting suits your artwork. These are the ones I would start with, all from our live range.

- Best for a lit backwall in a strong brand colour. The Formulate LED backwall, backlit with light blankets, £1,237.95 ex VAT for 3m.
- Best for a slim lit totem at the front of the stand on a tight budget. The Illumigo One, backlit with a roll-up LED panel, £276.95 ex VAT.
- Best for a lit panel inside a Fastframe fabric wall. The Fastframe LED frame, edge lit, £400.95 ex VAT for 1m x 2m.
- Best for shop walls, receptions and hanging signage. The Illuminova wall mounted frame, edge lit, from £553.95 ex VAT, or the Illuminova hanging frame from £1,274.95 ex VAT.
- Best for an open space with visitors on both sides. The 850mm x 2.25m freestanding LED lightbox display, edge lit and double-sided, £551.95 ex VAT.
Our freestanding lightbox banners such as the WaveLight Infinity use continuous edge lighting too, from £743.95 ex VAT for the large horizontal frame. If the display will be seen from both sides, the guide to single vs double sided lightboxes covers that choice. We can also make custom sizes to fit your space.
How we compared
This is a desk comparison of the published details on our own product pages, not a test of the frames.
- The lighting type of each frame comes from the lighting line in its published spec (edge-lit LED strips, LED beads in the side profiles, light blankets or a roll-up LED panel).
- Frame profiles, weights, LED counts, colour temperature and lumens are the published figures on each product page.
- Prices are live Stand Central prices, ex VAT, checked on 14 November 2026.
Frequently asked questions
Is edge lit better than backlit?
Neither is better in every case. Edge lighting gives a bright, even print in a frame that can be wall mounted, hung or freestanding, and suits busy artwork. A backlight puts LEDs behind the whole print, which keeps large flat colours more even. Choose on your artwork and where the frame will go.
What does edge-lit LED mean?
It means the LEDs sit in strips inside the frame edges rather than behind the print. They shine across the back of the fabric, and a liner or panel at the back pushes the light forward through your design, so it glows evenly without hot spots.
How do backlit light boxes work?
A backlit light box has an LED panel or light blanket behind the print, with LEDs spread across its whole area, and the light shines straight forward through backlit fabric. Our Formulate LED backwall uses three light blankets with 360 LEDs, and the Illumigo One uses a roll-up LED panel.
Can a fabric graphic be used with an edge-lit structure?
Yes. All our edge lit frames take a printed backlit fabric graphic with a silicone edge that pushes into a channel round the frame. The fabric lets the light through evenly, and you can swap it for a new design while the frame and LEDs stay as they are.
Which is brighter, edge lit or backlit?
Brightness depends on the LED count and light output of each frame rather than the lighting type alone, so check the details on the product page. For example, the backlit 3m Formulate gives about 21,600 lumens, while the edge lit Fastframe LED frame uses 26 one-watt LED beads.




