FREE UK delivery on orders of £200 or more
An 850mm wide roller banner standing 2.1m tall and made for outdoor use, printed on both sides so your message is seen coming and going. It suits forecourts, shop entrances, events and anywhere with steady foot traffic. Two printed graphics are included, one for each face.
Tech specs
- Assembled size: 895mm (W) x 2090mm (H) x 810mm (D)
- Weight: 11kg
- Printed sides: Double sided
- Visible graphic: 850mm wide x 2025mm high, per side
- Pole: Three-part bungee pole
- Feet: Large twin feet
- Graphic: 440gsm banner vinyl, UV printed, two graphics
- Graphic fitting: Screw-secured snap top rail
- Ground fixing: Ground pegs included
- Wind guidance: Beaufort 5 (18 to 24mph) pegged, Beaufort 2 (4 to 7mph) unpegged
- Carry case: Carry bag
- Use: Outdoor
Built for outdoors
Large twin feet give a wide, steady footprint, and ground pegs are supplied for soft ground. Pegged down, the banner is rated to force 5 on the Beaufort scale (18 to 24mph). Without pegs it is only rated to force 2 (4 to 7mph), so weigh it down if you cannot peg it.
Quick to set up
Both graphics come attached and rolled inside the unit, and each is held at the top by a screw-secured snap rail. The three-part bungee pole clicks together and holds both graphics upright. Afterwards, everything goes into the carry bag.
Your printed graphics
Both graphics are UV printed on 440gsm banner vinyl, chosen for outdoor work and suited to short-term campaigns with light weather exposure. The slightly textured surface gives a soft finish with strong colour. The vinyl has no blockout layer, so in bright sun a little of the other side may show through.
Artwork included
Every order includes FREE artwork design or proofing. Send us your artwork and we will check it before it goes to print, or our design team will create it for you at no extra cost.
Custom sizes and configurations
We can also make custom sizes and configurations to fit your space. Tell us what you need and we will put together a quote.
