FREE UK delivery on orders of £200 or more
A complete Vector exhibition stand for a 24m² space, with your design printed on fabric graphics for every frame and the counter. Wall modules in four widths, six posts, an archway and a door and extension kit for a storeroom shape the stand, with two built-in Illuminova LED lightbox modules. A Fastframe counter and two pairs of LED arm lights complete it.
Tech specs
- Stand size: 24m² (supplier configuration)
- Frame: 50mm anodised aluminium profile
- Graphics: Stretch polyester fabric, dye-sublimation printed, silicone edge (SEG)
- Graphic fitting: 3mm silicone edge pushes into the frame channel
- Wall height: 2.5m
- Assembly: Allen key for the frames, quick-release flip bars or bolts between modules
- Lighting: LED arm lights with drivers
- Lightbox: Two Illuminova LED lightbox modules built into the walls
- Counter: Fastframe counter with printed graphic and internal shelf
- Use: Indoor
What’s included
- 450mm x 2.5m Vector SEG Fabric Wall Module
- 950mm x 2.5m Vector SEG Fabric Wall Module (three)
- 1.85m × 2.5m Vector SEG Fabric Wall Module (two)
- 1.95m × 2.5m Vector SEG Fabric Wall Module
- 1.85m × 2.5m Illuminova Large LED Lightbox Module
- 1.85m × 1m Illuminova Wide LED Lightbox Module
- 950mm x 2.5m Vector Storeroom Door Module
- Vector Frame Post, 2.5m (six)
- 950mm x 2.55m Vector Archway Module
- Fastframe SEG Fabric Counter
- LED Exhibition Arm Lights (Pair with Driver) (two)
Your graphics, printed and ready
Every frame and the counter come with your artwork printed by dye sublimation onto stretch polyester fabric. Each graphic has a silicone strip around its edge that pushes into the channel of the aluminium profile, giving a tight, frameless face with no visible fixings. If the stand will sit under strong lighting, ask us about black-backed fabric so nothing shows through. Graphics can be reprinted for each new campaign while the frames stay the same.
A built-stand look from reusable modules
Vector uses a heavier 50mm aluminium profile than portable frame systems, so the finished stand feels solid and permanent. The profiles come in numbered lengths of up to 1250mm and screw together with a single Allen key. Once each module is built, quick-release flip bars or bolts lock it to its neighbours without tools. Storerooms, arches and raised sections are all part of the same system, which is what gives these layouts their architectural shape.
Pack down, store, rebuild
The modules break down into short lengths that pack into compact boxes for storage and transport. Because every piece is reusable, you can rebuild the same stand at the next show, rearrange the modules for a different space, or add walls or lighting later.
Artwork included
Every order includes FREE artwork design or proofing. Send us your artwork and we will check it before it goes to print, or our design team will create it for you at no extra cost.
Custom sizes and configurations
Want a different layout? We can put together a custom configuration of walls, counters, lighting and storage to fit your stand. Tell us about your space and we will put together a quote.
