A free-standing LED lightbox, 1m wide and 2m tall, that lights up your design on both sides. Backlit fabric graphics fit tight into an aluminium frame on stabilising feet, giving shops, receptions and exhibition stands a bright display that draws people in.
Tech specs
- Assembled size: 1000mm (W) x 2000mm (H)
- Frame depth: 120mm
- Printed sides: Double sided
- Power: UK power cable about 3m long, with transformer and fitted plug
- In the box: Aluminium frame with LEDs fitted, stabilising feet, power cable, allen key and two printed backlit graphics
Lit from within
Both faces carry your design, printed on backlit polyester and lit from inside the frame. You get two graphics as standard: the same message on each side or two different ones.
Your design is printed by dye-sublimation, which dyes the colour into the fabric for a rich, even finish. A thin silicone strip is sewn around the edge of the graphic and pushes into a channel in the frame, pulling the fabric tight with no visible fixings.
Premium lighting
The Premium frame uses more LEDs with a higher light output, and they run along the long edges of the frame for a more even, better quality light. The frame is 120mm deep.
Edge lighting suits busy, colourful designs best. Large areas of one flat colour can show slight differences in brightness, so build some variety into the artwork if you can.
Assembly and power
The aluminium frame comes in sections with stabilising feet and goes together with the allen key supplied. The LEDs are already fitted inside the frame, and power comes through a UK cable of about 3m with its transformer and plug fitted.
Each graphic has a small nylon pull tab to make it easy to lift out of the frame. We fit it at an upper corner, out of reach of children, unless you ask us to move it or leave it off.
Artwork included
Every order includes FREE artwork design or proofing. Send us your artwork and we will check it before it goes to print, or our design team will create it for you at no extra cost.



















