Zoom+ Feather Flag Extra Large, 4.9m Tall – Single-Sided

A 4.9m tall feather flag that lifts your logo and message well above head height at events, shopfronts, sports days and exhibitions. Your design is dye-sublimation printed on 110gsm flag knit and slips onto a black glass fibre pole that pushes together in minutes. The pole and printed flag come as a set, and you choose the base separately to suit hard ground or grass.

Tech specs

• Assembled size: 850mm (W) x 4900mm (H)
• Weight: 1.3kg
• Printed sides: Single sided
• Pole: Black glass fibre (GRP), push-fit sections
• Graphic: 110gsm flag knit polyester, dye-sublimation printed
• Graphic fitting: Pole pocket, secured at the base
• Base: Not included, choose separately for hard ground or grass
• Storage: Fabric pole sleeve included
• Wind guidance: Take down above Beaufort force 4 (13 to 18mph)
• Care: Machine wash at 30°C, no detergent
• Use: Indoor and outdoor (depends on base)

Printed single-sided

The extra large size is printed single-sided. The flag is one layer of knit, so your design shows through on the back as a mirror image, and the lighter build helps a flag this tall move freely in the breeze. If you need the wording to read correctly from both directions, the large size is available double-sided.

Quick to put up and pack away

The pole comes in a few sections with push-fit ends, so there are no tools or fixings to deal with. Slide the flag’s pole pocket over the assembled pole, secure the bottom with the cord or bungee, then drop the pole into your base. A fabric sleeve is supplied to keep the pole sections together and protected between events.

Choose a base to suit the ground

You get the pole and your printed flag. The base is a separate item, picked to match where the flag will stand. On grass or soft ground, a ground spike pushes into the turf. On paving, tarmac or an indoor floor, use a water-filled base, a weighted cross base or a square base. A drive-on car foot sits under a vehicle wheel, which suits forecourts and car parks. Some bases only suit the smaller heights, so tell us where the flag is going and we will match a base to your size.

Looking after your flag

Wash the flag in a normal machine at 30°C with no detergent and let it dry fully before you pack it away, so it stays free of mildew. Take it down if the wind picks up beyond force 4 on the Beaufort scale (roughly 13 to 18mph) or in heavy rain, as wet fabric puts extra load on the pole. Sunlight and city air will slowly fade the colours outdoors, and with regular use you can expect a flag to last around six months before it needs replacing, so a fresh print is an easy way to keep your branding looking sharp.

Artwork included

Every order includes FREE artwork design or proofing. Send us your artwork and we will check it before it goes to print, or our design team will create it for you at no extra cost.

Custom sizes and configurations

We can also make custom sizes and configurations to fit your space. Tell us what you need and we will put together a quote.