FREE UK delivery on orders of £200 or more
A complete Modulate exhibition stand for a 12m² space, with your design printed on fabric graphics for every frame, the counter and the feature totem. Square-cornered frames form the walls, with a Modulate door frame and hinged door for a storeroom, and a freestanding 600mm Formulate Monolith fabric totem breaks up the line of the stand. An illuminated Insta LED counter and two pairs of LED floodlights complete it.
Tech specs
- Stand size: 12m² (supplier configuration)
- Frame: 30mm aluminium tube, push-button joints, internal magnets
- Graphics: 260gsm stretch polyester fabric, dye-sublimation printed
- Graphic fitting: Pillowcase style, zips closed at the base
- Wall height: 2.4m
- Feet: Twist and lock feet, plus half feet
- Lighting: LED floodlights with drivers and clamps
- Counter: Insta LED illuminated counter with printed graphic
- Feature totem: Formulate Monolith, 600mm wide and 2.38m tall, on its own steel base
- Carry cases: Padded bag for each frame
- Use: Indoor
What’s included
- 800mm x 2.4m Modulate Modular Fabric Wall with Square Corners (three)
- 1m × 2.4m Modulate Modular Fabric Wall with Square Corners
- 2m × 2.4m Modulate Modular Fabric Wall with Square Corners (two)
- 800mm x 2.4m Modulate Storeroom Door Wall with Square Corners
- Modulate Half Feet (Pair) (three)
- Insta LED Exhibition Counter
- 600mm Formulate Monolith Fabric Display Totem
- LED Floodlights for Display Stands (Pair with Driver) (two)
- Spotlight Clamp for 30mm Tube Frames (Formulate and Modulate) (four)
Your graphics, printed and ready
Every frame and the counter come with your artwork printed by dye sublimation onto 260gsm stretch fabric. Each graphic slides over its frame like a pillowcase and zips shut along the bottom, so it pulls tight with no creases and no visible fixings. The fabric is washable and folds for storage, and new graphics can be printed whenever your message changes.
Magnetic frames that go up fast
Each frame is built from 30mm aluminium tube in numbered, colour-coded sections held together by bungee cord, and push buttons lock the joints. Magnets inside the uprights snap neighbouring frames together at almost any angle, so you can square off corners or angle a wall towards the aisle. Feet twist and lock into place by hand, and the LED floodlights clamp directly onto the tube. No tools are needed for the frames.
Easy to store and reuse
Every frame packs into its own padded bag with pockets for the feet and graphic, so the stand is quick to sort and load after a show. The frames work just as well on their own, so you can use part of the stand for a smaller event or add more frames later.
Artwork included
Every order includes FREE artwork design or proofing. Send us your artwork and we will check it before it goes to print, or our design team will create it for you at no extra cost.
Custom sizes and configurations
Want a different layout? We can put together a custom configuration of walls, counters, lighting and storage to fit your stand. Tell us about your space and we will put together a quote.
